The Best EDC Knives Under 3" 2019/2020

68 Likes
66 Comments
18 Shares
The Best EDC Knives Under 3" 2019/2020

When it comes to your EDC knife, size matters. And bigger isn't always better. A knife that's too big can be unwieldy to use and carry, not to mention illegal depending on where you live. On the flip side, a knife that's too small might take more effort for even simple tasks. For a lot of you, the best EDC knife is just under 3" long. In this guide, we'll break down why you might want a smaller knife, what to look for in a compact EDC, and highlight 10 EDC knives around the 2.5” to 3” sweet spot that are a cut above the rest.

What to Look for in a Compact EDC Knife

  • An ergonomic handle: Smaller blades means smaller handles, and less room for error. Make sure to choose a knife that’s comfortable to hold and makes use of jimping or smartly placed finger notches for a better grip.

  • A legal blade length and lockup: Be aware of your local knife laws as they vary from place to place. Some places don’t allow you to carry locking knives, while others don’t allow any knives to be carried at all. A good EDC knife can be a super useful tool, but it won’t do you much good if it gets confiscated.

  • A space-saving design: While it's important to consider the cutting length of the knife, don't gloss over how big it is when it's closed. Folders and flippers are great at saving space, which is why they’ve found their way into the pockets of many EDC’ers.

  • A sturdy, low-riding pocket clip: If you’re going to be carrying your knife in your pocket, it’s a good idea to be aware of the clip orientation of the knife. Do you prefer tip up or tip down? Are you a righty or a leftie? Pocket clips are great for keeping your knife easily accessible while freeing up space at the bottom of your pocket.

The following knives are some of the most popular and widely recommended options for EDC that measure in around the 2.5” to 3” blade length range.


The Best Small Pocket Knives for Everyday Carry in 2019/2020


Kershaw Cryo G10

Kershaw makes plenty of great affordable knives, but one that checks all the boxes for EDC is the Cryo G10. Its 8Cr13MoV steel blade measures 2.75” while the G10 handle on this updated model cuts weight and enhances grip. You can get the knife from your pocket to open position in no time thanks to Kershaw's signature SpeedSafe assisted opening that locks up with a sturdy frame lock. It also comes with a four position pocket clip which just adds to its versatility.

View on Amazon


Spyderco Delica 4

Spyderco first released the Delica in 1990, and every iteration since then has made it an even better EDC knife. The Delica 4 is the latest and greatest, with a 2.8” VG-10 blade that's shaped for general slicing utility. Its lightweight, bi-directional nylon handle gives you plenty of grip for those tasks that require a little more power. Whether you prefer to carry tip-up or tip-down, the 4-way clip of the Delica 4 has you covered.

View on Amazon


Gerber Paraframe Mini

A great EDC doesn’t need to break the bank. Just look at one of the most-carried knives by our readers: the Gerber Paraframe Mini. It only has a 2.2” blade, but because of its small size it’s easy to carry whether you take advantage of the pocket clip or not. This folder has a frame lock built into its sturdy stainless steel frame that's skeletonized to save on weight, making it great for everyday carry and use. Best of all, you can grab one for less than ten bucks.

View on Amazon


Benchmade Mini Griptilian

The Benchmade Mini Grip is a classic EDC knife and an excellent option for beginners and southpaws. Benchmade’s ambidextrous AXIS lock system gives it a smooth action so you can quickly deploy the blade with just a flick.  It has a 2.9” drop-point blade made from 58-61HRC steel that many EDCers swear by. Between the knurling on the handle and the smartly placed jimping along the spine, it’s easy to see where the Mini Grip gets its name.

View on Amazon


Victorinox Pioneer X

If you're looking for an EDC knife that covers as many bases as possible without the bulk, look no further than the Victorinox Pioneer X. Between the scissors, bottle opener, and screw drivers, the Pioneer X offers plenty of functionality to go along with its super sharp stainless steel blade. For simple tasks few knives are as versatile and convenient as the one that comes packed into the Pioneer X.

View on Amazon


CRKT Pilar

Judging by its popularity with other EDCers, the just-released Pilar from CRKT is already shaping up to be one of the best sub 3-inch knives you can get. It's a Voxnaes design with top notch handling, thanks to a finger choil in its 2.4” blade. The blade itself is made from 8Cr13MoV steel and has a thumb slot for flicking open the blade with one hand. Top that all off with two-way pocket clip, and the Pilar is a uniquely bold pocket knife that any EDCer can appreciate.

View on Amazon


Opinel No. 6

If you want a more traditional looking knife, an Opinel from France is a classic that still holds up today. The Opinel No. 6 is an affordable folder with a 2.7” carbon steel blade placed firmly in a classic wooden handle. Its unassuming design makes it easier to use around others without raising too many eyebrows. It does require some maintenance because of its carbon-rich steel, but if you take care of it you’ll be rewarded with a handy knife that can handle daily tasks with ease.

View on Amazon


Ontario RAT II

The RAT series from Ontario Knife Company earned its well-deserved reputation as an excellent set of value EDC knives for their slim, sturdy design and useful blade. The RAT II is 20% smaller than the original model, with a blade length coming in just around 3”. Slicing is a breeze with its thin, AUS-8 steel blade and ergonomic handle. The 4-way pocket clip offers plenty of flexibility in terms of how you choose to carry it, as does the lanyard hole and reversible thumb stud.

View on Amazon


Buck Vantage Pro 0342

You might be familiar with Buck for their iconic lockback knives for hunting, but their USA-made Vantage Pro 0342 should definitely be on your radar as a compact EDC option. This flipper has a 2-⅝” long drop-point blade with a nice balance of belly and thickness for more demanding cutting tasks. The Vantage Pro uses excellent materials as well, boasting S30V stainless steel between a molded nylon G10 handle. It has a reversible, deep pocket clip so you can carry it tip-up in either pocket.

View on Amazon


Chris Reeve Small Inkosi

Many knife enthusiasts and EDCers hail the Chris Reeve Sebenza as one of the best knives ever made for its excellent materials, craftsmanship, balance, and utility. So it's no surprise that their newest knife, designed to be a more EDC-focused update, could be your next grail. The Inkosi's titanium handle holds the 2.8” CPM-S35VN stainless steel drop point blade in place, with a smooth action that deploys with ease. Jimping on the spine of the knife and ergonomically placed notches in the handle provide excellent grip and control. With these utility-focused upgrades, the Inkosi has earned its place on the wish list of blade enthusiasts and amateurs alike.

Buy

Do you carry a knife on the smaller side? What's your favorite EDC knife in the sub-3” class? Share your thoughts in the comments below.

#buying-guides #knives #best-knives-under-35-inches #small-edc-knife #best-edc-knife-under-3 see all



Who Likes This (68)

59 others

Discussion (51 total)

Well [email protected], newbie accidentally thought he was editing and double posted, sorry about that. A little more info on the last post.
I am a newbie poster here after lurking for a year or so. I am retired and most days wear cargo pants or shorts as appropriate for the weather so my EDC options are most often based on that. I carry a Glock 30S with a high vis front night sight and a spare mag. For occasional “dressier wear” events my EDC is totally different.

My 2¢ Worth: I like Kershaw Knives and own several, a lot for the money, many good designs and even their Chinese Budget Knives are good quality.

While personally I don’t like Thumb Studs for opening I do EDC a knife with them! The Kershaw Speedsafe system is second to none and the speedsafe/flipper system is my choice of knives, that said there are folks that don’t like that combo. Each to his own, buy what you like and enjoy what you buy! Since I live in a state where Automatics are legal I enjoy owning a few of those too but not for EDC purposes. For casual EDC I wear a 10 year old Luminox Blackout with an aftermarket paracord band which I really like.

My usual EDC knife is a 3/4 Ton hell for stout knife, it is very heavy and has thumb stub opening but if they made something similar in a speedsafe flipper and knocked a couple of ounces off of it without significantly changing the blade I think it would be the absolute perfect EDC. Another great thing about the 3/4 Ton is they are literally disposable, they often can be found on special for around $10-12. No tears if you lose it. They sharpen easy and hold an edge pretty good for Chinese steel. Also, the huge blade is still under 3” making it legal in most places.

I would gladly pay the much higher price for a similar U.S. Made 3/4 Ton knife with speedsafe, a flipper and a bit lighter.
I am a newbie here but this is My 2¢ Worth: I like Kershaw Knives and own several, a lot for the money, many good designs and even the Chinese Budget Knives are good quality.

While personally I don’t like Thumb Studs for opening even though I often EDC one with them! The Kershaw Speedsafe system is second to none and the speedsafe/flipper system is my personal first choice of knives, that said there are many folks that don’t like that combo. Each to his own, buy what you like and enjoy what you buy! Since I live in a state where Automatics are legal I enjoy owning a few of those too but not much for EDC purposes.

I am retired and most often wear cargo pants or shorts. My usual EDC is a Kershaw 3/4 Ton hell for stout knife, it is very heavy and has thumb stub opening but if they made something similar in a speedsafe flipper and knocked a couple of ounces off of it without significantly changing the blade I think it would be the absolute perfect EDC. Another great thing about the 3/4 Ton is they are literally disposable, they often can be found for around $10-12. No tears if you lose it. They sharpen easy and hold an edge pretty good for Chinese steel. Also, the huge blade is still under 3” making it legal in most places.

I would gladly pay the much higher price for a similar U.S. Made 3/4 Ton knife with speedsafe, a flipper and a bit lighter. Damn things are almost indestructible.
I personally carry the Kershaw Leek and its great other than its a metal grip so it gets slippery at times.
I really like the Spyderco Deliica 4. One handed opening,, V10 steel, nice size, and good size. This knife is a winner. It is not a dress knife/gentleman’s folder. Much too sporty and casual looking; however, it is my EDC. Until I discovered the Spyderco Pingo! It is a two-handed, non-locking, 2.35 inch sheeps foot blade. Legal practically anywhere in the world. Good spring in knife mechanism means that it stays open until you want to close it. I really love this knife and carry it often. I alternate it with the Delica. Both are great pocket knives.
Thanks for using my photo of the yellow mini grip on top! Always awesome articles on here! Wish they would let me know when then use my photos so I can check out the article.
I have a knife i carry and use daily, I am a true advocate of EDC when paired with every day USE. These knife nuts and EDC fan boys are more often collectors. My knife measures 5.1" unfolded, 3 is plastic handle. The Blade tip was ground down by me as a small flat head for switch plate screws.
I was hoping to find practical solutions that would be a bit longer lasting and possibly better quality. I did not find this here, nor in the comments.
My knife was $20 for an assortment pack of like 18 knives. About $2 or less per knife if you take out the useless knives that came with the pack. I also used this knife when backpacking for months along the Appalachian Trail, and now as a production equipment maintenance and repair tech, also use this knife as a warehouse building maintenance manager, and as an HVAC journeymen.

SHAME YOU FAKERS. Pocket knives go INSIDE the pocket, not clipped onto the pocket. If it doesn't fit well in your pocket then its not a POCKET knife. Call your clip knives something else. The westerns and your grandfather would reach INSIDE their pocket to grab their POCKET knife. You crawl or wiggle or brush into all sorts of things and the insides of your pants pockets stays inside, but shit falls off or gets knocked off when using a clip. Work harder and you might realize these problems.
Idiot consumers blowing cash to feel a sense of manhood and community ruin the practicality and use driven consumers ability to influence the market and bring better choice.
I got the paraframe mini, and was not impressed at all. too tight and even after lubricating I had to loosen it, which also loosens the locking mechanism. It's pretty much junk.
What is the paracord braided thingy at the top of the first photo? I'm overcome with curiosity.
Cryo I and II are my usual go to EDC blade as they are perfect for anything I may come across or at least for "show" as the assisted opening will give someone pause when I whip it out quickly. Lol... When I am in CA near the ocean my Delica 4 is on me. Good blades here with exception of 1 or 2 imo. Someone complained about slipjoints, well we got a SAK listed and it's more useful than a single blade Spyderco though you can score a good steel Spyderco slip joint (Elmax) if ya know where to look. Nice article
I picked up a Rat II the other month, and so far it seems to be a decent little knife for the price. The only compliant I have is that it is not easy to flip open with just the thumb.. I have tried loosening the knife, but to no avail. The way it opens the meat of the thumb rests close to the very sharp edge of the blade, and so one small slip and you are slicing yourself. Combine that with the amount of needed to open, and I could see it easily happening. I have gotten better at quickly/carefully beginning to open, while flicking my wrist, but that is more work than other knives require.

I have seen a video review and that user's knife opened much better. So maybe it is just a QC issue...

Bottom line though, for the price and features, it is a small gripe for an otherwise good knife that I don't mind beating up on.
Personally I carry a Sypderco Ambitious. I actually got it recently and was definitely an upgrade from my Kershaw Shuffle.
Honest question: Are the Chris Reeve knives made so much better to justify being 8x the price of a Kershaw? I don't personally know anyone that carries one but how is it that much better than a $50 Kershaw?
You can get the Opinel in stainless steel. A rather good one. I love my stainless No 6.
That CRKT Pillar is a real awesome looking knife. Never really been a fan of Spiderco, Bench Made an ZT, not because I find anything wrong with there craftsmanship, but simply because they are heavily over priced. Then again, depending on what you use your blade for some peaople might prefer a more "showy" knife. I abuse my knife on a daily basis. Its used from skinning dear, to chopping wood. I personally can't afford to buy a $400 every year. So I buy a box of cheap knifes, work it till the blade is as thin as a needle, then toss it in the bin.
Do you skin deer on a daily basis? Also how do you use your knife chopping wood?
I Skin at least 5 to ten dear a week. I chop branches, kindle and small sticks for camp fires on a daily basis. I use the blade as a chisel and hammer on it with another stick. I am a PH, I make my living by taking people on hunting trips. Its my full time job. It doesn't pay much, so cheap tools is the best I can do.
13 more comments